Product manual

Installation instructions, Central Processing Unit (CPU2 with External Synchronisation) – REX BRD9032,
REX BRD9033 and REX BRD9034,
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
41
8.3 Installation
1. Put the jumper J13 in the correct position to activate the lithium battery (see figure 24).
Note:
See the warning about the lithium battery in the ‘Safety and regulatory information’ section in this
manual.
2. Download the latest CPU2/EMN-software with CSM management tool.
3. Put the jumper J4, shown in figure , in the correct position as described in paragraph 8.2.
4. Put the jumpers J16 and J14, shown in figure , in the correct position as described in paragraph 8.2.
5. Insert the CPU2/EMN board gently in the card rack at board position 24.
Note:
See also chapter 21, ‘CPU2 cabling’ and ‘Installation and Operation Manual Enterprise Mobility Node
(EMN)’