Product manual

Installation instructions, Central Processing Unit (CPU2/SA) – REX-BRD9031 and REX-BRD9035
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
36
7.3 Installation
1. Put the jumper J13 in the correct position to activate the lithium battery (see figure ).
Note:
See the warning about the lithium battery in the ‘Safety and regulatory information’ section in this
manual.
2. Download the latest CPU2-software with CSM management tool.
3. Put the jumper J4, shown in figure , in the correct position as described in paragraph 7.2.
4. Insert the CPU2 board gently in the card rack at board position 24.
Note:
See also chapter 21, ‘CPU2 cabling’.