Product manual

Installation instructions, Battery power unit

Technical Product Manual - DCT1800-GAP

TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C

3. Position the PSU at the back of the cabinet such that the side with the connectors is facing down

as indicated in figure

19.

4. Fix the PSU and the battery rack to the battery cabinet using 4 of the enclosed M5 x 10 screws.

Verify that the screws are tightened well to ensure the connection to protective earth.

Fig. 18 Removal of the front cover

Mounting the battery cabinet

1. The battery cabinet has to be mounted next to the modular cabinet(s) it is going to supply.

2. Mount the mounting bracket to the wall next to a modular cabinet, using the encloses wood screws

and plugs.

3. Hang up the cabinet and mark the lower two retaining holes.

4. Drill the holes and insert the plugs and screws.

5. Fasten the 2 screws.

WARNING

Make sure that the battery cabinet is well secured to the wall, since the

batteries are heavy.

Front cover

Drawer

020