Product manual

Installation instructions, Modular cabinet – REX-BAS900nn (BDVNB 101 01/16)
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
15
7. Hang the cabinet to the mounting bracket and mark the lower two retaining holes.
8. Drill the holes and insert the plugs.
9. Repeat this procedure for the other cabinets. The cabinets must be placed against each other,
such that the shielding gasket contacts always have good contact with each other. The space
between the cabinets should never be more than 8 mm.
The easiest way to install the modular cabinet’s cabling, is to put the cabinet on its back on a desk.
Fig. 6 Removal of the front cover and the drawer
Fig. 7 Fastening the mounting brackets of the modular cabinets
1
2
3
5
Front cover
Conductive tape
or brake-out plate
drawer
6
1
4
006
Distance adjustment plate Mounting bracket
007