Product manual

Product specifications, Power supply units
Technical Product Manual - DCT1800-GAP
TD 92093 (1/LZBNB 103 108 R4D) / 2006-03-09/ Ver.C
© 2006
20
Input voltage : 230 −10% to 240 +6% Vrms
Max. load : 300 W resistive, or 230 W top-rectifying load
Frequency : 47 to 64 Hz
Output voltage : 36 Vrms (35 to 38 Vrms)
7.3 Battery power unit
Compliance to regulations and standards
CE regulation : 73/23/EEC and 89/36/EEC
CE marking : CE
Safety standards : EN 60950/IEC950 class II
EMC standards : EN 55022 class B
EN 50082-1
7.3.1 Battery cabinet set – REX-BAS0053 (BKBNB 101 02/1)
This set contains a battery cabinet with mounting and installation material. The cabinet is similar to
the modular cabinet, but has a different interior.
Width x depth x height : 256 x 299 x 432 mm
Housing material : zinc plated steel sheet
Colour : coral white (NCS 1002−R)
Application information : for indoor use, wall mounted
Weight empty : 9.3 kg
Weight installed : 33.9 kg (including batteries and PSU)
Number of batteries to be
installed : 4
7.3.2 Power supply unit – REX-BAS0063 (BML 351 48)
This power supply unit fits on the rear side of the battery cabinet.
Electrical safety : EN60950/IEC950 class II and EN41003
Output : SELV circuit according to IEC950
EMC : CISPR 22 class B
Fusing
The unit is protected by two fast 6.3 A fuses.
Environmental
Operating temperature : 0 to 40 °C
Relative humidity : 20 to 80%
General specifications
Width x depth x height : 195 x 45 x 262 mm
Mains input (rated range) : 198 to 264 Vrms
Frequency : 47 to 64 Hz
Output voltage, nominal : 48 Vdc
Output voltage, at delivery : 54.5 ± 0.1 Vdc
Power consumption from mains: 272 W maximum
Output power : 260 W maximum
Under voltage disconnect : −43 V