Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
85
1 Enter the IP address or host name to the server in the CMG Server Address text field.
2 Enter the port number to be used by the CMG server in the Port Number text field.
3 Enter user name and password for logging in to the CMG server, in the User name and
Password text fields.
4 Click “Activate”.
8.7 Digit manipulation in the Central Phonebook
When importing telephone numbers, it is sometimes necessary to automatically change the
way a number is written according to preset conditions.
Depending on where a number is situated, Unite CM can alter the number that is returned in
a phonebook query. If, for example, the queried number is situated within the same local
exchange, the telephone number is considered to be an internal number and the number is
stripped from superfluous international prefixes, etc.
Telephone number standards
There are several standardized ways of writing telephone numbers.
The following formats are currently supported:
Examples
The following figure shows the elements of a telephone number, [phone] (in
canonical format), used in the parameter descriptions below.
Figure 46. Example of how a telephone number is built up from different prefixes and extensions.
Format Comment
[phone] E.164 international standard and E.123
[phone] E.123 local number
[phone] National prefix + national destination code in parentheses
[phone] National prefix in parentheses
[phone] Canonical address format
4631551234 Digits only. Conversion is controlled by setting maximum
lengths of internal and national numbers.
Figure 42.
Country Code
National
Destination
Code
46 31 55 1234
Extension
PBX
Prefix