Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
82
3 Enter the IP address to the module where the phonebook is located (default
localhost).
4 Click “Activate”.
8.4 Select Phonebook Database
Select which database to use for telephone numbers; “Local - 500 Editable”, “Local - 2000
View only”, “LDAP”, or “CMG”.
• If the default local database is selected, continue in chapter 4.6.1 Import Entries to the
Phonebook from a CSV File on page 33, 4.6.2 Export the Phonebook to a CSV File and
4.6.3 Add Entries to the Phonebook.
• If LDAP server is selected, continue in chapter 8.5 LDAP Parameter Setup on page 82.
• If CMG server is selected, continue in chapter 8.6 CMG Parameter Setup on page 84.
1 Click “Configuration” on the start page
2 Click Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Phonebook” in the menu on the Advanced Configuration page.
4 Select which database to use in the “Database for lookups” drop-down list.
8.5 LDAP Parameter Setup
The Lightweight Directory Access Protocol version 3 (LDAPv3) is an application protocol for
querying and modifying directory services running over TCP/IP. Unite CM starts an LDAP
session by connecting to an LDAP server. Unite CM then sends operation requests to the
server and the server sends responses in return.
An LDAP directory is a tree of directory entries and follows the structure below:
• An entry consists of a set of attributes.
• An attribute has a name and one or more values.
An entry can look like this:
dn: cn=John Ericson,dc=company,dc=com
cn: John Ericson
givenName: John
sn: Ericson
telephoneNumber: [phone]
1 Click the LDAP settings link.
2 Enter the IP or hostname to the LDAP server in the LDAP Server or Proxy Address
field.
3 Enter the port number used by the LDAP server in the Port Number field.
4 Select how to authenticate to the LDAP server in the Authentication Method drop
down list.
NOTE: If the authentication method “SASL/DIGEST-MD5” is selected, the IP address for
primary DNS server must be entered in the DNS server field on the Network setup
page. Otherwise it is not possible to authenticate with the LDAP directory Microsoft
Active Directory 2003.