Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
77
7.10.1 Set Time in System 900
The time in Unite CM can also determine the time in System 900.
1 Click the “Setup System 900 time” link in the Time settings window.
2 Select “Yes”.
3 Click “Activate”.
7.10.2 Manual Time setting (if Web browser is Time Source)
If Web browser has been selected as time source, the time must be set manually. Otherwise
this setting shall not be done. The settings can also be set in the setup wizard.
1 Click “Set time” under Time.
Figure 40. The Set Date and Time page.
2 Enter date and time.
3 Click “Submit time”.
7.11 Network Setting
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on Configuration page.
Figure 36.