Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
74
New services can be added by importing new OA-XML files, see 7.8 Importing new OA-XML
file on page 75.
7.6.1 Configuration
The Message Distribution lists for the different interfaces have to be configured to send the
information (i.e. alarms, user data, location etc.) to the OAP Server in Unite CM, in order to
give the client access to the information. The address of the OAP Server is xxx.xxx.xxx.xxx/
OAP where “xxx.xxx.xxx.xxx” is the IP address of the Unite CM running the OAP Server
application (usually internal host 127.0.0.1).
Refer to 15.2.3 DECT Message Distribution on page 116, 17.4 WLAN Message Distribution
on page 123 and 18.2 System 900 Message Distribution on page 125.
7.7 Java Server/GSM
NOTE: Requires an additional license
Open Access Java makes it possible to communicate with an Ascom messaging system, as
well as between an external application and an Ascom messaging system, by using a Java
application. The Java application will run in an embedded environment and act as an
interface between an external system and Ascom systems.
The Java interface is defined by the OA-XML protocol. New services can be added by
importing new OA-XML files, see 7.8 Importing new OA-XML file on page 75.
The Unite CM is at delivery supplied with a preinstalled GSM/SMS application, but other
applications can be developed and executed on the Unite CM, refer to Programming Guide,
Open Java Server (OJS), TD 92230GB.
IMPORTANT: It is not possible to upload and run a java application on the Unite CM if the
GSM interface is used.
7.7.1 Upload an Application to Unite CM
The application should be uploaded to the Unite CM FTP area.
1 Log on to Unite CM with an FTP client. Note that how to log on can differ between
different FTP clients.
1
Default username is “ftpuser” and default password is “changemetoo”.
xxx.xxx.xxx.xxx is the host name.
Examples:
• Windows Explorer: fill in “ftp://username:[e-mail]” in the
address field.
• Firefox: fill in “ftp://xxx.xxx.xxx.xxx” in the address field and log on with
“username” and “password”.
2 Upload the application to the Unite CM.
3 Restart the Java application from the Unite CM Administration page. The restart is
accessed on http://xxx.xxx.xxx.xxx/apprestart (xxx.xxx.xxx.xxx is the IP address of
the Unite CM). The user ftpuser can be used.
4 Perform a functionality test of the uploaded application.
1.Internet Explorer is not an FTP client so its not possible to copy and move files from Internet Explorer.