Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
73
• Serial port channel
1 Click one of the “NOT USED” links for Serial port channel in the Remote
Management Server page, to set up a new channel.
One serial port channel for each tool, for example WinBK for System 900
configuration, has to be set up. Web based configuration tools do not require serial
port channels.
2 Set up the channel and click “Activate”.
The configuration of the remote management server is described in detail in Function
Description, Remote Management, TD 92257GB.
7.5 Unlock GUI Managed by Unite AM
This option does only appear if the communication between Unite AM and Unite CM has
been lost for more than 60 seconds. The option makes it possible to unlock the GUIs in the
Unite CM that are managed by the Unite AM. If the communication is re-established, the
GUIs in the Unite CM will be locked once again.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Select “UniteAM Management” in the menu on the Advanced Configuration page. An
UniteAM Handling dialog window opens.
4 Click "Unlock" to unlock the GUIs in the Unite CM.
7.6 Open Access Protocol (OAP)
NOTE: OAPv4 requires an additional license.
This function makes it possible for client applications to communicate with other connected
systems, for example the Cordless Telephone System. The protocol that is used for
communication is called Open Access Protocol (OAP).
The OAP interface is defined by the OA-XML protocol. New services can be added by
importing new OA-XML files, see 7.8 Importing new OA-XML file on page 75.
Refer to Function Description, Open Access Protocol (OAP), TD 92215GB for more
information about the protocol and when it can be used.