Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
72
• Remote connection
1 Click “Edit” for Remote Connection, to set up the connection parameters.
2 Set up the connection parameters and click “Activate”.
•Open ports
1 Click “Edit” for Open Ports in the Remote Management Server page, to open any
additional ports that are needed for configuration tools.
This is a secured setting and before it can be activated it must manually be confirmed
by pressing the mode button on the module.
For WinBK, CSM and TIP port 10101 has to be open. To be able to use the Activity Log
Viewer over a remote connection, port 10130 has to be open.
2 Set up the port parameters and click “Activate”.