Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
66
5 Device Manager
The management of devices, that is, handsets and chargers, is done in the Device Manager
application in Unite CM.
NOTE: The IP address to the interface (for example IP-DECT or WLAN) the devices are
connected to must be configured. When this is done, the devices can log in to the
Device Manager. See 6.1 Device Management Setup on page 67.
Figure 36. Device Manager in Unite CM.
1 Click “Device Manager” on the start page. A Login window opens.
2 Enter User ID and Password and click “OK”.
A description of Device Manager and how it is intended to be used, is found in a separate
document; the User Manual, Device Manager in Unite Connectivity Manager, TD 92855EN.
Figure 32.