Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
65
NOTE: Saving file can take several minutes if configuration contains many files, for instance
if many software files and devices has been added to device management.
4.14 Restore the Configuration
NOTE: When Unite CM is restored, all changes that have been made since the last backup
will be discarded.
1 Click “Configuration” on the start page.
2 Select Other > Backup/Restore on the Configuration page.
3 Click “Browse” button and select the backup file.
4 Click the “Restore” button.
The text “Backup successfully restored!“ will be displayed and inform you when the
restore is ready. Restoring can take several minutes if backup file is large, for instance
if many software files and devices is included in backup.
5 Click the “Restart Now” or the “Restart Later” button. If the IP address or DECT
interface has been changed the module needs to be restarted for the settings to take
effect.
A restart will take a couple of minutes and during that time Unite CM is unreachable.
When the restart is completed, the window will refresh to the Configuration page
overview.