Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
49
4 Go back to the Advanced Handling and Event Handler, see 5.13.4 Configuration of
Events.
4.9.4 Configuration of Events
This is used to make assignment of Event Elements.
1 Click Configuration.
Figure 23. Event Handler Configuration
For simple configuration setup, it is only necessary to make configurations in External
Actions and Assignments in the selected external action, and in Translation Tables >
Location description.
It is possible to get explanation and instruction of the Event Handler parts by clicking on
each of the boxes in the figure that shows the event flow.
Configuration Examples
You can find an example of a complete configuration that can be used as a template, in each
type of External Action.
Event Triggers
This is where conditions on incoming events are defined, and where to activate predefined
actions. There are different way of doing this, condition can be set up in Match Condition or
in Activation. Several conditions can be set up for the Event that occur.
• Click “Event Triggers” and select trigger.
Figure 22.