Troubleshooting guide

TD 92735EN

15 May 2012 / Ver. G

Installation and Operation Manual

Unite Connectivity Manager

• Data Trigger

1 Enter data in the Data text field.

2 If the data is to be sent from a specific handset, enter handset No. in the Number text

field. Leave empty if any handset shall be able to send the data. Note that the

handset must be defined in Messaging Users.

Select Type of Action

1 Select type of action in the Actions drop-down list and click “Add”. Several actions

can be added.

• Message Action

NOTE: Call IDs must be defined in Messaging Users. Refer to 4.1 Add Users to Unite CM on

page 19.

1 Do one of the following:

•In the Call ID text field, enter the Call ID that should receive the message.

• Click the symbol, to the right of the Call ID text field, if the message is to be

sent as a reply to the sender of the alarm or data.