Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
41
Define Trigger
1 Select type of trigger in the Triggers drop-down list and click “Add”. Several triggers
of the same type can be added to the same action.
•Alarm Trigger
1 Select trigger in the Alarm Type drop-down list.
2 If the alarm is to be sent from a specific handset, enter handset no. in the Number
text field. Leave empty if any handset shall be able to trigger the alarm. Note that the
handset must be defined in Messaging Users.
3 Click “Add”.
•Input Trigger
1 Select input in the Input drop-down list. Only inputs defined in the I/O Setup are
available. Refer to 4.7 Input/Output Setup on page 34.
2 Enter (in seconds) the interval between repetitions in the Repetition Time text field.
Note that this field must be set to min. 10 seconds even if no repetitions shall be
made.
3 Enter how many times the action shall be repeated in the Max. No. of Repetitions text
field. For no repetitions, enter “0”.
4 Click “Add”.