Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
34
4 Enter the following settings in the text fields:
5 To add several rows click “Add” again.
6 Click “Save”.
4.7 Input/Output Setup
Figure 10. Configuration
Inputs and outputs are defined in the I/O Setup page found in the left menu under “Other”.
The activation of an input can be set to “on opening” or “on closing”, and the initial state for
the output can be set to “Low” or “High”.
Figure 11. I/O Setup page
For the outputs, the state is set to the opposite of the initial state when activated. For
example; if Output 2 is set to "Low" in initial state, the output will automatically be set to
"High" when activated.
Setting Description
Last Name: The family name
First Name: The first (given) name
Number: The phone number
Figure 10.
Figure 11.