Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
32
2 Click “Add” to set up a new work shift.
3 Enter the following settings in the text fields:
4 Click “Save”.
4.6 Configure the Phonebook
Figure 9. The Phonebook
The phonebook makes it possible for users to search and find phonebook entries from a
handset in the system.
NOTE: If an LDAP connection to a central phonebook is used, all settings needed is done in
the setup wizard.
If a local phonebook is used the entries must be added, either by creating them manually,
see 4.6.3 Add Entries to the Phonebook on page 33 or importing them from a CSV file as
described below.
Setting Description
Work Shift Name: Enter the name of the work shift.
Mode: Select shift mode;
Time
On – Enabled, regardless of time
Off – Disabled
Days: Which day(s) the shift shall be active.
Start Time: When the shift shall start, for example 08.00
Stop Time: When the shift shall stop, for example 17.00
Figure 9.