Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
30
The fields can also remain empty and only category selected. Then all Call IDs in
that category will be shown.
3 Click “Search”. A list with matching Call IDs will be displayed.
4 Select users by clicking the “Add” button.
5 Close the UNS search list.
6 Click “Save” or, if you want to also activate the group in the carrier system, click
“Save and activate”.
4.3.3 Broadcast Group
1 Click “Users & Groups” on the start page.
2 Select Messaging > Groups in the menu on the Configuration page
3 Click “Broadcast ID”.
4 Enter the following settings:
5 Click “Save”.
4.4 Create User Teams
Access rights within the system are given to User Teams. In Unite CM, messaging rights and
log view rights are set up to different User Teams. One user can belong to several User
Teams. To edit authorities for the User Teams, see 20.3 User Teams on page 137.
There is a default User Team that is used for logs without any connection to a user, for
example a message that is sent to a handset that does not belong to any user.
1 Click Messaging > Teams in the menu on the Configuration page.
Call ID: Create a Broadcast ID (numerical or a text string up to 50
characters).
Description: Description of the Call ID (up to 100 characters)
Included categories: Select the categories you want to include.
Category: Defined in Message Routing, Category Setup.