Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
29
3 Click “Multicast Group ID”.
4 Enter the following settings:
Add Members to the Multicast Group
5 Add members/handsets to the group, in the Member Administration section, either
by A) adding members one by one or B) search for members to add.
NOTE: The Call IDs must have been defined in Messaging > Users, if not, the group cannot be
saved.
A) Adding members one by one:
1 Click the “Add” button and enter the first Call ID.
2 Click the “Add” button again and enter the next Call ID.
3 Continue until all members are added to the group.
B) Search for members to add:
1 Click the “Call ID Search” button.
2 Enter the first number(s) in the Call ID or Number/Address field, followed by the
wildcard “*”.
Setting Description
Call ID: Create a Multicast Group ID (numerical or a text string up to
50 characters).
Description: Description of the multicast group.
Group Number: The number defined in the number plan for the sub system/
radio exchange.
Included Categories: Select category/categories. Defined in Message Routing,
Category Setup.