Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
28
Add Members to the Group
6 Add members/handsets to the group in the Member Administration section, either
by A) adding members one by one or B) search for members to add.
NOTE: The Call IDs must have been defined in Messaging > Users, if not, the group cannot be
saved.
A) Adding members one by one:
1 Click the “Add Member” button and enter the first Call ID.
2 Select if you want the next row to be “Empty” (default), to “copy previous” Call ID
or “increment previous” Call ID by choosing an option button.
3 Click “Add Member”.
4 Enter the next Call ID
B) Search for members to add:
1 Click the “Call ID Search” button.
2 Enter the first number(s) in the Call ID or Number/Address field, followed by the
wildcard “*”.
The fields can also remain empty and only category selected. Then all Call IDs in
that category will be shown.
3 Click “Search”. A list with matching Call IDs will be displayed.
4 Select users by clicking the “Add” button.
5 Close the UNS search list.
6 Click “Save”.
4.3.2 Multicast Group
1 Click “Users & Groups” on the start page.
2 Select Messaging > Groups in the menu on the Configuration page
Diversion permitted for
included members: Yes - Group messages will be delivered as any other
messages.
No - No diversion will be made for group messages