Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
25
Add an unconditional diversion
1 Click the top symbol, as shown in the figure below. A secondary destination is
created, meaning that all messages are directed to the primary and to the secondary
destination.
The secondary destination can also have conditional diversions. It is also possible to
set up diversions that depend on work shifts.
2 Enter settings and click “Save”.
It is possible to collapse and expand the diversions by clicking the plus (+) and minus (-)
symbols in the view.
Edit diversions by clicking the symbol and delete diversions by clicking the
symbol.
Disable top level destination in a diversion chain
If at least one secondary destination is created, it is possible to temporarily disable the top
level destination by clicking the symbol and then marking the “Disable” option button.
At least one destination must always be enabled.
4.2.3 Additional Call IDs
A user can have several Call IDs. An additional Call ID can be used if the users Call ID has been
added as text and messages is to be sent from devices that only can handle numerical.
1 Click Messaging > Users in the menu on the Configuration page.
2 Click the symbol to the right of the user.
3 Click the “Show/hide advanced settings” button on the User Setup page.
4 Click “Add new...”.
5 Enter Call ID and Description in the text fields.