Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
19
4 Basic Configuration
The basic configuration requires system administrator or administrator rights. With user
rights you will only be able to access and configure Users & Groups and the Phonebook.
Refer to chapter 3 General on page 13.
4.1 Add Users to Unite CM
Users must be added to enable messaging in the system and any User Team and/or Work
Shift the user shall belong to, must be defined before a user can be added to it. Refer to 4.4
Create User Teams on page 30 and 4.5 Create Work Shifts on page 31. The messaging
system to which the user belongs, that is, Category, is defined in the Setup Wizard.
Figure 7. Users & Groups
1 Click “Users & Groups” on the start page.
2 Select Messaging > Users in the menu on the Configuration page.
3 Click the “Add” button.
(Using the “Advanced Add” button gives you the possibility to create individual
passwords, select user teams and create diversion rules for the user, see 4.2
Additional User Settings on page 20.).
4 Enter following settings:
Figure 7.
Setting Description
Last Name: The family name
First Name: The first (given) name
Call ID: The Call ID can be numerical or a text string (max 50
characters). Normally the Call ID is set as the same as the
handset phone number.
Number/Address: The phone number or the personal address within
selected category.
Category: This is the messaging system to which the handset
belongs, (defined in the Setup Wizard). Updating or
adding messaging systems is done in
Messaging > Categories.