Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
225
H.5 Load the HL7 v2 Translation Table
The translation table is the link between a HL7 style message and the Event Handler in Unite
CM. A default translation table is included in the Unite CM. The translation table is defined/
modified by the customer.
This instruction describes how to load the HL7 default translation table.
1 Click “Configuration” on the start page.
2 Select Alarm & Events > Advanced Handling in the menu on the Configuration page.
3 Click “Administration”.
4 Click “Load HL7 version 2” to load the sample database.
5 Click “Translation Tables” to open the Event Handler Configuration page.
Figure 111. HL7 Translation Table v2.
For more information on how to create/edit a translation table, see Programming Guide,
Event Handler, TD 92329GB.
For information on Source text from HL7, see an applicable HL7 document.
Define HL7 v2 Segment Data
The source text is used to indicate from which HL7 segment data needs to be extracted. The
destination text defines what data is extracted from the segment and how the event
element will be named. They are defined as:
• Source text = HL7 segment ID as defined by the standard (for example PID)
• Destination text = <description>!<number of values>!<ELEMENT_TO_EXTRACT>
Where:
• number of values = number of ELEMENT_TO_EXTRACT occurrences that follows in this
definition.
Figure 105.