Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
224
• When MSH fields 15 and 16 both are omitted, only an application acknowledgement
with value 'AA' will be send.
Figure 110. Two different acknowledgments.
The Commit Accept acknowledgement will be send as soon as the Event Handler starts to
process the HL7 message. The application acknowledgement will be send as soon as the
event elements are sent to the Action Handler.
H.4 Configure Unite CM
ASCII Input Interface
The ASCII input interface is configured for Minimum Lower Level Protocol (MLLP) session
control over a TCP connection on port 2575 (HL7 port, registered at www.iana.org).
1On the Advance Configuration page, select “ASCII” to edit the configuration.
2 If a HL7 port already is configured in TCP Server Parameters, click “HL7-MLLP” or
similar to verify your settings. Otherwise, click “NOT USED”.
3 Enter the parameters according to figure above.
Figure 104.
U
n
i
t
e
C
o
n
n
e
c
t
i
v
i
t
y
M
a
n
a
g
e
r
ASCOM
ASCII
EH
Action
Handler
DECT