Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
223
Event Handler - Action Handler
Based on a translation table that is defined by the customer, the Event Handler will extract
the needed information from the paging body text and send that as event elements to the
Action Handler.
Figure 109. Event Handler translation table.
Acknowledgements
In HL7 two types of acknowledgements exist. Accept and Application acknowledgement.
The MSH segment of the received HL7 message defines which type of acknowledgment the
sending party expects. This EH configuration is build to only send 'accept' on both types of
acknowledgements. This EH configuration will not send 'error' or 'reject' for those two types
of acknowledgements. A customer who would like this functionality needs to extend the
configuration himself.
Depending on the values of Fields 15 and 16 of the MSH segment an acknowledgement
type is expected.
The EH configuration will always send:
• Accept acknowledgement with value CA “commit accept” when MSH field 15 has a value
of AL (always) or SU (success completion)
• Application acknowledgement with value AA “application accept” when MSH field 16
has a value of AL (always) or SU (success completion)
Figure 103.
U
n
i
t
e
C
o
n
n
e
c
t
i
v
i
t
y
M
a
n
a
g
e
r
ASCOM
ASCII
EH
Action
Handler
DECT
UNITE
UNITE
UNITE
UNITE
UNITE
UNITE
UNITE
UNITE