Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
16
3.3 Password Settings
The default passwords for the different type of users; sysadmin, admin etc., can be changed
and it is also possible to specify the password complexity, such as length and number of
character types. Passwords can be changed in both the Setup Wizard and on the Advanced
Configuration page, but the password complexity (password policy) can only be changed on
the Advanced Configuration page.
It is possible to change passwords for different users in both the Setup Wizard and from the
Advanced Configuration page.
3.3.1 Change Passwords
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Change Passwords” under Security in the menu on the Advanced Configuration
page.
4 Select the user you want to change password for.
5 Enter your user name and password. Enter the new password and confirm the
password.
6 Click “Ch. Passwd”.
3.3.2 Set Password Policy
The required password complexity can be set.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu in the on the Configuration page.
3 Select “Password policy” under Security in the menu on the Advanced Configuration
page.
Figure 6. The Password Policy page
4 Select password policy.
Unite CM configuration
Access to the setup wizard
No No Yes Yes
Change passwords No No Yes
a
Yes
a.admin cannot change password for sysadmin.
Figure 6.