Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
215
Alarm cancellation
For handset 1440, Alarm cancellation is setup with a Data Trigger with an Alarm with
duration of 1 second.
Figure 101. Activating an Action for Alarm Cancellation.
It does not matter which handset that sends the data so the trigger is general when it
comes to handset number.
The output is set to the initial state again (after 1 second).
Example 2
When the door to one of the cold-storage rooms opens, the input from Cold-storage room is
activated. If the door is open longer than 2 minutes a message is sent and the lamp above
the door is lit. If the door still is open after 10 minutes another message is sent. After 15
minutes another message is sent and the siren starts to sound. When the door is closed the
siren and lamp are turned off.
Three alarm actions are created. One that handles the alarm called “Cold-storage room
open”, one called “Cold-store room open very long“ and one called “Cold-storage room
closed“.
Figure 92.