Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
204
B.4 Cables for Remote Management Client
Figure 90. Connection for Remote Management.
A cable with RS232 and D-SUB (9-pin female) connectors is required to be able to manage
Unite CM via a Remote Management Client. The cable should be connected to the COM1 port
on Unite CM and to a free COM port on the PC.
Figure 91. Cable wiring for RMC
B.5 Cables for GSM Modem
A straight modem cable with RS232 and D-sub connector is required to be able to transmit
messages via a GSM modem.
Figure 92. Cable wiring for modem with 9-pin D-sub connector.
Figure 85.
Figure 86.
RS232
COM 1 port COM port
Unite
Connectivity
Manager
RMC
2 RX
1 DCD
3 TX
5 GND
9-pin female
D-sub connector
8 CTS
Unite CM
7 RTS
9-pin male
D-sub connector
Modem
2 RX
1 DCD
3 TX
5 GND
8 CTS
7 RTS