Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
182
2 Enter/select following settings:
3 Click “Save”.
• Export to E-mail
To be able to export via E-mail, the IP address/host name of the mail server must be
set up (defined in the Setup Wizard).
1 Click “Add E-mail entry”.
2 Enter/select following settings:
3 Click “Save”.
Export Activity Logs in Realtime to a Syslog Server
Activities in the module are logged and can be exported to a Syslog Server where the logs
can be managed and analyzed. Messages are sent to the syslog server every time an activity
occur in the module. Example of activities are: An SMS has been sent to a handset, an alarm
has been received from a handset, an error has occurred in the module etc. Syslog is a simple
protocol (SYStem LOG protocol) for transmitting event messages and alerts text across an IP
network. The activities are sent as text messages from the module to the Syslog Server. The
IP address to the Syslog Server must be set in the module. The activities can be exported to
5 syslog servers in parallel.
Settings Description
FTP Server Address: IP address for the FTP server.
Path: The path to a directory on the FTP server where exported files
should be placed.
FTP User: User name to log in to the FTP server.
Password: Password for entered user.
User ID: Enter ID if only the activities the user is allowed to see shall be
exported. If left empty, all activities will be exported.
File format: Export in the format CSV or XML.
If the log file should be analysed with the Log Analyser, then
XML format should be chosen. Otherwise the choice of format
is dependent of the tool that should be used for analysing the
data.
Settings Description
E-mail Address: Destination address for the export.
User ID: Enter ID if only the activities the user is allowed to see shall be
exported. If left empty, all activities will be exported.
File format: Export in the format CSV or XML. If the log file should be analysed
with the Log Analyser, then XML format should be chosen.
Otherwise the choice of format is dependent of the tool that
should be used for analysing the data.