Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
181
1 Enter/select the following settings:
2 Click “Export”. A dialogue window will open where the activity log can be saved to
the local file system.
Automatic export
The automatic export can be done regularly or when the database is full. If the exported
data exceeds maximum file size, the data will be divided into several files. In the picture
below, the log will be exported daily at 12:00
1 Enter/select the following settings:
2 Define if the automatic export should be sent to a file or as an E-mail, see separate
descriptions below how to configure the different types of exports.
• Export to File
1 Click “Add FTP entry”.
Settings Description
Start date and time: For example, 2005, June, 04, 14.30
End date and time: For example, 2005, June, 05, 02.00
File format: Export in the format CSV or XML.
If the log file should be analysed with the Log Analyser, then
XML format should be chosen. Otherwise the choice of format
is dependent of the tool that should be used for analysing the
data.
Settings Description
Export type: Predefined values to choose from, for example; No export,
Database full only, Daily, Hourly etc. Depending on the chosen
value, the page will look different.
Enter time data in the fields, if the chosen export type is time
based.
File size: 100 - 30 000 kB. Enter max. size in kB of exported file. If file
becomes larger, exported data will be divided into multiple files or
e-mails.
File name: File name to use when exporting the activity log.
A time-stamp and a counter is added after the file name for each
new file that is exported.