Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
179
3 Click “Save”.
• Discarding Activities based on Type
It is possible to discard activities regardless of the sender/receiver. By default, the following
activity types are discarded; Availability Status, Location Data, Presentation and
Presentation Response.
1 Select activities from the Store box that should not be included in the log.
2 Move the activities into the Discard box with the arrow button.
3 Click “Save”.
23.6.3 Log Export Settings
Stored activities can be exported, either manually or automatically in CSV or XML file format.
Automatic export can be to send logs to an FTP server or attach logs to an e-mail.
Manual export is used when a certain time period of the activity log should be exported and
automatic export is used when the activity log should be exported regularly, for example the
same time every day. On this page, it is also possible to clear all stored Activity Logs.
1 Click “Configuration” on the start page.
2 Select Activity Log > Log Export in the menu on the Configuration page.
Settings Description
Discard (default): All activity logs will be stored if nothing else is specified.
If Discard is selected and IP Address/Service is specified -
Note that all activities from/to the specified service or
module will not be stored.
Store: Only activities from/to listed IP addresses/services will be
stored.
Note that all activities sent from another address/service
than specified will be lost.
IP Address/Service: On the format: xxx.xxx.xxx.xxx/service
Truncation level: Specifies number of message characters to store in the
database before truncation. 1 - 100 characters can be
entered. If left empty the default characters level will be
used, 100 for subject and 200 for body.
Discard administration
events: Specifies if administrational events shall be filtered out or
not.