Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
177
Details for a specific activity log can be printed by marking the log, right-click and selecting
Print Details from the displayed menu.
Continues Log View
By clicking the “Update view continuously” symbol, the activity logs will be displayed
when received by Unite CM. The logging can be stopped by clicking the “Stop updating
view” symbol. It is also possible to pause by selecting the “Lock scrolling” check box.
Figure 80. The information of the most recent activity logs are viewed.
The symbol located next to the “Lock scrolling” check box, indicates that the continuous
view is activated.
When the extended activity log is enabled for a module, the symbol for extended activity
logs will show up in front of incoming intermediate logs. This log is only for quick
information, a “real” activity log will appear shortly after.
23.6.2 Storage Settings
Figure 81. The Storage Settings page, showing the basic storage settings.
The storage settings are divided into basic settings and advanced settings. With the basic
settings, it is possible to store activities based on set priority. This concerns messages,
Figure 76.
Figure 77.