Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
170
Define Actions
Message Action
1 Click “Add message” to define a message to send.
2 Enter the Call ID (must be defined as a messaging user, refer to 4.1 Add Users to
Unite CM on page 19).
3 Enter the message text.
4 Select the Include log info check box to add the fault information to the message
text.
5 Select the beep code level.
6 Select the priority level.
7 To add another message to send, click “Add Message” again.
E-mail Action
To be able to send E-mail from the Fault Handler, the IP address/host name of the mail
server must be set up (defined in the Setup Wizard).
1 Click “Add Email” to define an e-mail to send.