Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
163
persistent. The persistent fault will be cleared when the input is deactivated. The inputs are
defined on the I/O Setup page.
When monitoring is started/ended, an Activity Log with information about the changes will
be sent.
1 Click “Configuration” on the start page.
2 Select Supervision > Auxiliary Equipment in the menu on the Configuration page.
Adding Auxiliary Equipment
1 Select an Input from the drop-down list that contains all inputs configured on the
I/O Setup page.
2 Click “Add Auxiliary Equipment” to add selected input.
Status Symbols Description
Monitored
The input is not defined in the I/O setup.
The auxiliary equipment has activated the input,
i.e. signals a fault.
Not monitored