Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
10
2.4 Basic Configuration Steps
Figure 2. The Setup Wizard
The first time and as long as Unite CM is not configured, the setup wizard will start
automatically when logging on from a web browser. It requires an “admin” or “sysadmin”
password, refer to 3 General on page 13.
The content of the wizard is depending on the license. It means that all configuration is not
shown for all licenses.
1 Log on to Unite CM.
The setup wizard will open and help you with the basic configuration. The setup
wizard includes the following settings:
• Network setup – can be set manually or via DHCP.
• License number – the type of license determines the functionality.
• Type of connected wireless phone system – the exchange used by the handsets in
the system. Select “None“ for handsets in the VoWiFi System.
• IP address to the connected DECT phone system (if connected via IP).
• Serial Interface (input) – enables paging from external equipment (using ESPA,
Ascom Line protocol or TAP).
• Description of connected messaging systems – i.e. systems Unite CM should be
able to send text messages to and receive personal alarms from. The description
is used when setting up users with messaging handsets. Use a description, max
50 characters long, that is familiar to the persons administering the users.
• Address to the mail server – to be able to send fault information and export
activity logs via e-mail.
• Date and time properties/settings – for time stamps on activities.
• Phonebook properties – database to use when searching (local phonebook on
Unite CM, LDAP server or CMG server).
• LDAP/CMG Properties – (only visible if LDAP/CMG is selected in the Central
Phonebook Properties)
• Passwords – change from default to site specific passwords.
2 Add users.
To enable messaging to and between handsets, all users must be added to Unite CM.
Refer to 4.1 Add Users to Unite CM on page 19.
3 Create groups (optional).
Groups makes it possible to send one message to several handsets. Refer to 4.3
Create Groups on page 26.
4 Create User Teams (optional).
User Teams makes it possible to give users different access rights. Refer to 4.4 Create
User Teams on page 30. Access rights for User Teams needs to be defined if Duty
Assignment is going to be used.
5 Create work shifts (optional).
Work shifts makes it possible to create diversions to different Call IDs depending on
active work shift. Refer to 4.5 Create Work Shifts on page 31.
Figure 2.