Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
158
4 Click the “Add” button to the right of the module in the New Modules list, see figure
68, to add the module.
The added modules will be shown in the Existing Modules list.
Figure 73. List of existing modules at a definite time
System Survey Status Symbols
When a system or module is surveyed, but not supervised, the status symbol for each
module will show Module not supervised, see below.
Unite Module Overview
When all modules have been set up for survey, the Unite Module overview page gives a
snapshot of the system at the time stated uppermost on the page.
If a new system survey is wanted, click the “Survey System” button again. If any new
modules have been added to the system since the last survey, they will be shown in the
“New modules” list and can be set up to be supervised.
Remove Unite Modules from the Overview
If a module is physically removed from the system and a new survey is made, the module is
not automatically removed from the Unite Module overview page. The result of the survey
for that module will be “Module lost”.
To remove the module from the Unite Module overview page, click the “Delete” symbol. A
dialogue window opens, click “OK” to remove the module.
Figure 69.
Symbol Description
Module not supervised
Module lost