Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
157
23 System Supervision and Security
Figure 71. Configuration
23.1 Unite Modules
23.1.1 System Survey
It is possible to survey other Unite modules in the system. All Unite modules connected to
the LAN (System Survey) or just one single module.
1 Click “Configuration” on the start page.
2 Select Supervision > Unite Modules in the menu on the Configuration page
3 Click “Survey System” button located at the bottom of the Unite Module overview
page to start a system survey.
• To survey one single module, enter the IP address for the module and then click
the “Survey Module” button.
When the system or a single module is surveyed, information about the module is
shown. New modules that are found are shown in a separate list, New Modules.
Modules that are lost since the last survey are shown in the list Lost Modules.
Figure 72. New surveyed modules
The survey request is sent out as a broadcast message, meaning that any module
placed outside a router will not receive the request. If a module is placed outside the
local LAN router, a specific request (Survey Module) to that module must be made for
the first survey. Once the module has been added to the list of “Existing modules”, it
will be included in subsequent system survey requests. If an existing module is not
answering on the broadcast message, a directly addressed survey request will always
be sent.
Figure 67.
Figure 68.