Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
148
3 Select FTP area under Common in the menu on the Advanced Configuration page.
4 Fill in required size between 5 – 150 MB and click “Activate”.
5 Press the mode button on the module.
This is a secured setting so you will be prompt to confirm the change by pressing the
mode button.
6 Click “Activate” to save the changes.
7 Click the mode button to return to normal mode immediately or wait 10 minutes for
the module to return automatically. Any secured setting can be activated within the
10 minutes period.
The module needs to be restarted for the changes to take effect.
22.2.2 Files for Translation/Editing
1 Log on to Unite CM with an FTP client. Note that how to log on can differ between
different FTP clients.
1
Default username is “ftpuser” and default password is “changemetoo”.
xxx.xxx.xxx.xxx is the host name.
Examples:
• Windows Explorer: fill in “ftp://username:[e-mail]” in the
address field.
• Firefox: fill in “ftp://xxx.xxx.xxx.xxx” in the address field and log on with
“username” and “password”.
The files located in the Start page and Netpage folders, including GIFs and CSS, can be
downloaded/copied to a folder on your hard disc.
Figure 64. Folders on the FTP area
1.Internet Explorer is not an FTP client. It can be used for viewing but not for transferring files.
Figure 60.