Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
132
3 Browse to find the CSV file. Choose the sort order. Click “Upload file”.
When the CSV file is uploaded, it will be converted and saved as “uploadednrlist.js”.
The file is a text file with the following format:
nr_array=[[“First name 1”,”Surname 1”,”Telephone number 1”],[“First name 2”,
”Surname 2”,”Telephone number 2”]];
If you later want to edit the number list, the “uploadednrlist.js” file is accessible with
the FTP client and can also be modified manually.
4 Test that the number list works as desired.
5 Make a backup of the “uploadednrlist.js” file, see further in 19.4.4 Backup and
Restore of NetPage files on page 133.
NOTE: When the phonebook has been updated, be sure to clear the cache memory on the
web browser.
19.4.3 Colored messaging
It is possible to add color information in messages sent to handsets. The beep code in a
message is mapped to a color. When this feature is enabled, color information will be added
to all transmitted messages.
This feature only works for DECT and WLAN, not for System 900.
1 Click “Configuration” on the start page.
2 Click Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Coloured Messaging” in the menu on the Advanced Configuration page.
Figure 54. The Coloured Messaging page.
4 Set Coloured Messaging enabled to “Yes” or “No”.
5 Map which colors that shall correspond to the different beep codes. These colors are
displayed with messages in the handsets.
6 Click “Activate”.
Figure 50.