Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
130
4 Enter text to be shown as title. Click “Activate”.
19.4.2 NetPage Configuration
Configure NetPage messaging
The following settings are applicable for NetPage web messaging.
To set messaging properties:
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on Configuration page.
3 Select “Web Messaging” in the menu on Advanced Configuration page.
Figure 52. The Message page.
4 Enter values for messaging.
The following parameter can be set:
• Message max length.
Sets the maximum number of characters that can be forwarded to a unit. Messages
longer than the set value are truncated.
• Call ID range - Lower limit
Sets the lower limit of a Call ID range. Messages sent to Call IDs out of this range are
cancelled. An empty field means no lower limit.
• Call ID range - Upper limit
Sets the upper limit of a Call ID range. Messages sent to Call IDs out of this range are
cancelled. An empty field means no upper limit.
User login required
Sets whether a login is required for NetPage. If set, only configured users can login to
NetPage. This parameter will only have effect on the default GUI (index4).
• Automatic logout when idle (minutes)
Sets how long a user can be idle before being logged out. To prevent automatic logout,
leave this field empty. If the parameter “User login required” is set to “No”, leave this
field empty.
• Messaging rights. Choose between Call ID range and User rights to determine how
NetPage shall verify Call IDs.
“Call ID range” means that Call IDs are verified according to the Call ID range limit
Figure 48.