Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
129
There is a limited storage area. This means that, for groups with approximately 20
characters (name and Call ID), the following applies:
19.3.1 Create Groups
1 Click “My groups“ button in NetPage.
2 Click “Add group“.
3 Enter a name for the group in the Name text field.
4 Click the “To“ button and select users (from the phonebook) to be members of this
group or enter number in the Call ID text field and click “Add“.
5 Click “Save“.
6 Click “Close“ to exit the administration.
19.3.2 Edit Groups
1 Click “My groups“ button in NetPage.
2 Click the group that should be changed.
3 Make changes and click “Save“.
4 Click “Close“ to exit the administration.
19.4 Additional Messaging Configuration
NOTE: Requires “admin” or “sysadmin” password, see chapter 3 General on page 13.
The operation of the messaging tools is described in 19.1 Create and Send Messages via the
Messaging Tool on page 126.
19.4.1 Messaging Tool Configuration
It is possible to change the title of the Messaging Tool web page.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Messaging Tool” in the menu on Advanced Configuration page.
Figure 51. The Messaging Tool page.
Amount of Groups Group Members
10 19
15 7
20 2
Figure 47.