Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
127
19.2 Create and Send Messages via NetPage
NOTE: Requires an additional license, see 1.1 Licenses for Unite CM on page 1.
1 Click “Send Message” on the start page. The NetPage opens.
2 Click either the “To” button to fetch number from the Users list or enter number in
the Call ID field and click “Add”. Several Call IDs can be added.
If the message shall be sent to a group click the “Use group“ button, select group and
click “OK”.
3 Enter message text in the Message text field or click “Use predefined message”,
select a message in the list and click “OK”.
4 Click “Send”.
19.2.1 Predefined Messages
NOTE: This feature can only be reached from index4.
The predefined messages include message text, beep characteristics, priority and message
type. There are two types of messages: “Common Messages” and “My Messages”.
NOTE: The maximum message length differs depending on which system or handset the
message is sent to and the amount of special characters included in the message.
Common Messages
Common Messages can be used by all NetPage users. Up to 30 “Common Messages” can be
created. These messages are stored on Unite CM and can only be changed by authorized
persons.