Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
125
18.2 System 900 Message Distribution
The 900 Interface has distribution lists that define where incoming data from the handsets
in the System 900 and the System 900 modules should be sent. The receivers are addressed
in the same way as for the DECT or WLAN Interface that is described in Installation Guide,
Elise3, TD 92679GB.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Messaging Distribution” under 900 Interface in the menu on the Advanced
Configuration page.
The following information is supported:
•Alarm
- Personal alarms with location information from handsets.
•Mobile Data
- Data sent from handsets.
• Input activity
- An input on an Alarm Module has been activated.
•Location
- Special Location
1
information from handsets.
• Availability Info
- Includes absence information, that is if a handset is placed in Charging/Storage Rack.
Pagings that are received from the A-bus will be transmitted to the destination that
corresponds to a Messaging User.
1. The Special Location can be sent every time a cordless phone gets a new location from a locator in the system. This
requires configuration both in the handset and in the locator. Also called “Immediate Alarm Transmission”.