Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
123
The function is only valid when the authentication method is set to “Common password”
or to “Number as password”.
• External location server
An external location server can be used for obtaining location information about a
device. When enabled, the timeout specifies the maximum time an alarm will wait for
location data from the location server, before the alarm is distributed to the alarm
recipients, i.e. what delay is acceptable in your specific system.
• External location server address
Enter the location server address in the format IP address/service. If only IP address is
specified, EventHandler will be used as a default service.
5 Click “Activate”.
17.4 WLAN Message Distribution
The WLAN Interface has distribution lists that define where incoming data from handsets,
for example alarms and user data, should be sent.
To find settings for WLAN Message Distribution, do as follows:
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Click “Message Distribution” under WLAN Interface in the menu on the Advanced
Configuration page.
The following information is supported:
•Alarm
- Personal alarm from VoWiFi handsets.
• Mobile Data
- User data sent from VoWiFi handsets.
• Availability Info
- Change of status of the VoWiFi handsets.
(The status can be changed from Unite CM GUI or from the VoWiFi handset).
The addressing of the receivers is described in Installation Guide, Installation Guide, Elise3,
TD 92679GB.