Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
121
8 Use the same phone user and phone password that was given the user in the CUCM.
See 16.1 CUCM Configuration on page 119 step 2.
9 Optionally, in the Default notification sound text field and Siren notification sound
text field, change the file name of the default notification sound and the siren sound.
10 Optionally, in the Message update interval (seconds) text field, change the message
update interval. The default is 60 seconds, which means that a message update will
be sent to the handset every 60 seconds until a response of the message is selected
by the handset user.
11 Click "Activate".
16.3 Translations
This is where to set the text for soft keys which are displayed on the handset when receiving
a message. The soft keys differ from different Unite messaging types. The length of the text
can differ depending on the model of handset that is used. The text should be as short as
possible.
In the corresponding text field, enter the name of the soft key to be displayed depending on
which type of message that is received.