Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
118
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Select “Clear Absence List” in the menu on the Advanced Configuration page.
4 Click the “Clear” button.
NOTE: When the absence list is cleared, Unite CM will consider handsets that currently are
placed in a charger or manually set to absent as present.
15.4 Base Station Conversion
The base station IDs that are received together with personal alarms can be converted to
another ID before it is sent to the system.
15.4.1 Background
In some systems, the base station IDs might alter when the Cordless Telephone System is
upgraded. In the alarm handling the base station IDs are used for location determination of
an alarming handset. Normally the ID is converted to a text string that describes the
location. The ID can also be used in trigger conditions, for example to decide which guards
that should be informed about an alarm. To avoid having to update the base station IDs in
many different places in the configuration of the alarm handling, Unite CM can convert the
base station IDs before it is sent to the alarm system.
This can be convenient regardless of how the Cordless Telephone System handles an
upgrade as the base station IDs normally consists of about ten characters. The base station
conversion can then be used to shorten the IDs before it is sent to the alarm system. It is
also possible to convert the ID to a descriptive text.
15.4.2 Configuration
The Base Station Conversion can be reached from the Advanced Configuration page.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Select “Base Station Conversion” under DECT Interface in the menu on the Advanced
Configuration page.
4 Enter the file name or click “Browse” and select the file.
5 Click “Import file”.
The conversion table is imported as a CSV file, with the base station ID in the first column
and the new ID in the second. The new ID is a string of maximum 50 characters. IDs that are
not included in the table will be sent to the alarm system without any conversion.