Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
111
5 Click “Activate”.
14.2.2 SMTP Output Interface (send reply message as e-mail)
Subject text and body text in acknowledgement and delivery reports back to origin sender
can be modified.
1 Click “Configuration” on the start page.
2 Select Other > Advanced Configuration in the menu on the Configuration page.
3 Click “SMTP” under Output Interfaces, in the menu on the Advanced Configuration
page.
4 The following settings can be selected/changed:
Introductory text in message: Text in front of the forwarded e-mail (note: the
characters are included in max. message length)
Response option text: Text in messages with response option.
Allowed IP addresses: If e-mail shall be accepted from specific mail servers
/ clients only, the IP addresses must be specified
here.
Allowed mail senders: If e-mail shall be accepted from specific sender
addresses only, the e-mail addresses must be
specified here.
Settings Description
Mail subject when user sends
positive/negative
acknowledgement:
Subject text in acknowledgement sent to origin
sender.
Mail body when user sends
positive acknowledge:
Body text in positive acknowledgement sent to
origin sender.
Mail body when user sends
negative acknowledge:
Body text in negative acknowledgement sent to
origin sender.