Troubleshooting guide

TD 92735EN
15 May 2012 / Ver. G
Installation and Operation Manual
Unite Connectivity Manager
106
1 Log on to Unite CM with an FTP client. Note that how to log on can differ between
different FTP clients.
1
Default username is “ftpuser” and default password is “changemetoo”.
xxx.xxx.xxx.xxx is the host name.
Examples:
• Windows Explorer: fill in “ftp://username:[e-mail]” in the
address field.
• Firefox: fill in “ftp://xxx.xxx.xxx.xxx” in the address field and log on with
“username” and “password”.
2 Download the following files located in the client folder:
•pinCode.txt
• Parameters.txt
3 Enter your PIN code in pinCode.txt
4 Set the baud rate used by Unite CM by editing Parameters.txt
5 Upload the changed files.
6 Restart the module.
Now we assume the following:
• the GSM modem is connected to serial port 1 (COM1) on Unite CM.
• Unite CM has license for GSM modem interface and the GSM check box is selected as
Connected Messaging System in the setup wizard during the setup.
1 Click “Users & Groups” on the start page.
2 Select Messaging > Users and click “Add”.
3 Enter the name and a Call ID. The Call ID can be any number or a text.
4 Enter the GSM phone number in the Number/Address text field.
5 Select “Java Server/GSM” in the Category drop-down list.
6 Click “Save”.
13.2 Send Message from Unite CM to GSM User
Sending a message to the GSM phone (with the possibility to accept or reject the message)
is done the same way as to handsets in the system, see 19.1 Create and Send Messages via
the Messaging Tool on page 126 or 19.2 Create and Send Messages via NetPage on page
127.
1.Internet Explorer is not an FTP client so its not possible to copy and move files from Internet Explorer.