User manual

TD 92582EN
21 June 2012 / Ver. G
User Manual
Ascom d41 DECT Handset
39
To subscribe a new system, the “Park:” (Portable Access Right Key) and “Ac:”
(Authentication code) related to the system are needed. Contact the system administrator
for more information.
Note: The PARK code may not be needed if there is no alien DECT system within the
coverage area.
The IPEI code is a unique code which has been assigned to the handset, see also 10.1
Admin Menu on page 40.
1 Enter System name. Press "next".
2 Enter PARK code. The PARK code may not be needed if there is no alien DECT
system within the coverage area.
3 Enter AC code. Press "Next".
An information text "Protection on?" is displayed.
4 Select "Yes" if the new system needs to be protected. It is not possible to delete a
protected subscription from the System menu
1
.
5 Press "OK". A searching mode starts.
Unsubscribe System
1 Select "Unsubscribe"
1
.
2 Select the system to unsubscribe in the list.
3 Press "Select".
4 Press "Yes" to unsubscribe the system. Otherwise, press "No".
Rename System
It is possible to change the name of the system in the handset.
1 Select "Rename System".
2 Select system to rename.
3 Press "Edit"
4 Enter new name.
5 Select "Save".
Priority
The default order of priority is the order of entered subscriptions. This means that the first
subscribed system has the highest priority. This list can be edited by the user. It is possible
to set the systems in priority by moving them up or down in the list.
Note: This is used in combination with system set to be "Automatic", see Change System
on page 38.
1 Select "Priority".
2 Change the priority if needed by selecting "Up" or "Down". The priority will be
saved when "Back" is selected.
1. It is not possible to unsubscribe a protected system via the System menu. The unsubscribtion must be made via the
Admin menu or the DECT system.